FF: Screwed Up
I didn't know whether this should be a Wordless Wednesday photo or a Fixed-it Friday photo, but it's Friday so here goes (I AM Wordless though)...
I didn't know whether this should be a Wordless Wednesday photo or a Fixed-it Friday photo, but it's Friday so here goes (I AM Wordless though)...
Ohio BBS Guidance Document: "Schools are being cautioned against purchasing and deploying devices before the rules take effect as some devices currently on the market may not be allowable once new rules are adopted."
Today's Wordless Wednesday photo came from the New York Daily News. The full article about the high-end furniture store being cited by OSHA for blocked egress routes and propped open fire doors can be read here...
Sometimes a question crosses my desk that surprises me - it seems like after 6+ years of writing about doors and hardware every day I would have heard them all, but this was a first. I was asked to find out where in the codes it states that a removable mullion is acceptable to use on a fire door assembly...
What do you think of this new Fixed-it Friday product idea? It looks like it would be a little pricey and I'm not sure how a whole class would fit inside, but I give him credit for the engineering. I could use one of these to hide from my kids. :)
Last month, along with a panel of experts, I presented the myths and facts about classroom barricade devices on behalf of the Door Security and Safety Foundation for the annual conference of the National Association of State Fire Marshals (NASFM). I recorded my portion of the presentation so I could post the myths and facts here. Feel free to share the link with those considering the use of barricade devices, or any jurisdictions discussing the possibility of changing their codes.
Seriously...this Wordless Wednesday photo makes me want to cry. Posted with the permission of Ron Burgess Jr. of the Westport Fire Department (originally posted on the Truck Floor Training Facebook page).
One of my original goals when I started this blog in 2009, was to make learning about codes less painful. I think these whiteboard animation videos do just that! Here's the latest...all about fire door assemblies!
This Fixed-it Friday photo illustrates the common problem of an access control system that has been modified for convenience. No matter how much time and money are invested in planning and installing a system, human intervention is always a factor...
If you have not watched this 2014 Dateline series on school shootings, it gives the perspective of survivors and describes their struggles in the months and years after the tragedies occurred. Very moving.
The door in these Wordless Wednesday photos has 7 surface bolts, an exit alarm, a door position switch, AND a rolling door. Wow.
Delayed egress vs. controlled egress...can you explain the difference? Do you know when and where each type of locking hardware is allowed, and what the IBC requires in order to ensure life safety?
People ask me all the time..."What's a 'CUSH' closer?" The answer is in our latest whiteboard animation video!
You may have to look at these for a few minutes to get the gist of what's happening. These are double-egress pairs in a hotel I stayed in recently. Instead of using a double-egress frame so the doors were in the same plane, each door was mounted on the opposite side of a double-rabbet frame...
This is why I use PDF code books!
What I want to know is...why do some people think it's ok to use these locks after-hours, when the building is unoccupied? I don't see anything in the codes to support that, but it seems to be a common belief. Am I missing something?
I am often asked whether it is code-compliant to install a separate deadbolt with a latchset or lockset on a dwelling unit entry door in an assisted living facility. Most doors in a means of egress are required to unlatch with one operation for egress. While there is an exception...
I don't know that I've ever seen floor stops like these...
This is one of the most common questions I receive...do you know when and where panic hardware is required?
Articles touting the value of classroom barricade devices without any mention of the related safety issues are legitimizing the use of these devices that are not compliant with the model codes. An article in this month's Security Management magazine, a publication of ASIS International, covers the perceived security benefits of the devices used in the Mentor, Ohio school district...
I've had many requests for help lately with regard to converting an existing fire door with a mortise lock to a cylindrical lock. There are several concerns here...
Last year I posted a link to a guide on the US Access Board's website, which helps to explain the ADA Standards. Initially, the online guide only covered Chapters 1-3. The Access Board recently added Chapter 4 to the guide (found here), which is the chapter covering Accessible Routes - including Doors, Doorways, and Gates...
I've shared several news stories about high school students designing barricade devices (here's one, here's another), but now the Air Force Research Lab has joined the effort. Sadly, this "innovation" probably won't stop until a tragedy occurs...
I hope this whiteboard animation video helps to explain one of hardware's most confusing topics - flush bolts and coordinators!
I've written quite a few specifications for museum projects and although many architects have asked me for "invisible doors," I do my best to talk them out of it. These are two different museums, in two different states, but these Wordless Wednesday photos were both sent to me the same week by two different people...
Today I presented as part of a panel discussion at the annual conference of the National Association of State Fire Marshals, along with my fellow panelists: Larry Flowers - Ohio State Fire Marshal, Ed Paulk - Alabama State Fire Marshal, Kelly Nicolello of UL, and John Woestman of the Builders Hardware Manufacturers Association. The panel was moderated by Jim Tidwell of Tidwell Code Consulting, and Jim Narva of NASFM kicked it off.
As many of you know, I have been closely watching the barricade device issue in Ohio. If you haven't been following along, here's the summary of what happened:
The theory is that the stick on this hold-open is there so you don't have to bend over to install/remove the wedge. I'll bet the architect who chose those door pulls didn't have this aesthetic in mind. Thank you to Rachel Smith of Karpen Steel for this Fixed-it Friday photo!
Here's the latest in our series of whiteboard animation videos explaining door-related topics. This one covers various options for securing classroom doors, in alignment with the guidelines from the National Association of State Fire Marshals. Enjoy and share!
These photos from an Alabama day care center make me nauseous. Literally. I'm Wordless.
I recently went on a field trip to an elementary school with Greg Thomson (Allegion specwriter) and a group of our specwriter apprentices, and we saw a couple of interesting applications in the courtyard. The courtyard is fully enclosed so a means of egress is required at each end...
I've received several photos lately of restroom doors with non-code-compliant deadbolts. Some examples of this problem could be...
Today's Fixed-it Friday photo is from Joe Cross of Allegion. This actuator mounting location does NOT meet the recommendations of the A156.19 standard...
(Note: If you're in the St. Louis area, there is a school security seminar coming up on July 22th, and there's still space if you want to attend.) Today's post: I haven't posted much about traditional wired glass lately, but the hazard continues to be present in existing schools and other facilities...
I've seen a lot of funky egress route restrictions in airports, but this was a first...
Some of you might be thinking..."Doors can't be disguised like that!" but this mural is on the access or ingress side of the door, not the egress side. The model codes require means of egress doors to be readily distinguishable and easily recognizable as doors, but this requirement is typically applied to the egress side of the door...
I often find that I am more cautious about modifying code requirements than even the AHJ. This opening is serving an Assembly occupancy, where delayed egress is not allowed by the IBC. In addition, the AHJ approved the 30-second delay instead of 15 seconds...
Yesterday's post was not ready in time for the afternoon notification, so in addition to today's Fixed-it Friday photo, there's a bonus set of photos from the Bronx Zoo. If you're reading this on the email notification, you should see the zoo link below. Happy Friday!
As promised in Monday's post, here are some of the doors we saw during our visit to the Bronx Zoo. Keep your camera ready during your summer vacation and send me some photos of interesting doors that you see (please)!
I have nothing to say except "thank you to Grah Security for today's Wordless Wednesday photo."
We just got back from NYC, where we were invited to visit the FDNY fire station for Engine 320 and Ladder 167 by the developer of the Cease Fire hinge, which I wrote about last fall. The kids are working on a project to help reduce deaths in home fires, so it was a privilege to visit the station and get all of their questions answered...
I checked with the ICC and NFPA for a code opinion, and both staff members acknowledged that the code does not address this specific issue, so it would be left up to the AHJ. One made a good point - the time to initiate the timer and the time to release the device should be two separate periods...
The first response might be - there's no exit sign, so no problem, right? Wrong! While I can't say for sure that these particular doors are egress doors, using the presence of exit signs to determine whether the door is in a required means of egress is not a reliable plan. If a door has an exit sign, it needs to meet the egress requirements. And even if it doesn't have an exit sign...
This Wordless Wednesday photo from John Gant of Allegion ties in with Monday's post about viewer locations. I've never seen a requirement for 3 viewers in a hotel room door, so my guess is that one of the viewers was originally installed at the wrong location and a third was added to solve the problem...
I read an interesting article in the Washington Post yesterday, about the statistics on school shootings. The Fact Checker column asks, "Has there been one school shooting per week since Sandy Hook?" and examines a statement made by Senator Chris Murphy during a speech on the Senate floor last week:
Whenever something is not specifically addressed in the model codes or national standards, I'm bound to get questions on it, and viewer height is one of those things. ICC A117.1 - Accessible and Usable Buildings and Facilities and the 2010 ADA Standards do not include a specific mounting height for the viewer...
Jenny Pauley of Kendell Doors sent me this Fixed-it Friday photo of a non-code-compliant repair that was made because the top corner of the fire door split. This is pretty common when corner-wrap flush bolts are used, because of the amount of wood that is removed...
This report gives a very good overview of what we're up against in the mission to secure schools while maintaining life safety. If funding is not available, schools will come up with their own solutions. If those solutions are not code-compliant, legislators will override the codes. This will continue to happen until another tragedy occurs. I wonder how many tragedies it will take.
Jeff Payton of Williams Electronics sent today's Wordless Wednesday photo. I'm the first to admit that I'm not an expert on exit signs. If you ARE an expert on exit signs, can you explain the need for the high-level sign? If only the door closer installer had taken as much pride in the installation as the conduit installer. :)
How do we help to ensure that these creative problem-solvers have the necessary information when considering a do-it-yourself approach?