This Fixed-it Friday photo from David Seeley of Anixter is not the first zip tie "fix" we've seen, but it might be the yuckiest. I may be one of the few people who would look at a restaurant's door and question the condition of the kitchen, but I think this would be a no for me.
There has been a lot of confusion over the last decade or two about smoke barrier doors in hospitals, nursing homes, and other types of health care facilities. The answers to these FAQs should help to clarify the requirements.
I LOVE to receive Wordless Wednesday photos from readers' travels. This one is from Bill Dorner of Allegion, and was taken in a pub in Kinsale, Ireland. The problem of blocked exits is clearly a global issue.
After I posted my Decoded article about fire door clearance, I found out that Hal Kelton of DOORDATA Solutions is presenting a webinar TOMORROW (Wednesday) on how to mitigate problems with fire door gaps! Here's the info...
My next Decoded article addresses a recent study on clearances for fire door assemblies - the results of the testing may surprise you. Please share any input or questions before the article goes to print!
Does this coffee shop exit look weird to anyone else, or is it just me? Any theories about what happened here? Thank you to Charles Anderson for today's Fixed-it Friday photo!
Many school security experts advise schools to keep classroom doors locked at all times, but is that feasible? How do we overcome the challenge of security vs. convenience? WWYD?
Today's Wordless Wednesday post underscores yet again the value of closed doors during a fire. If you haven't heard about the "Close Before You Doze" educational efforts, you can learn more at closeyourdoor.org.
I get a lot of requests for training on fire door assembly inspection, and I just realized that one of my coworker Jeff Tock's sessions was recorded and made available on YouTube! You can check it out in today's post.
Last week, I received some photos of a pair of fire doors with LBR fire exit hardware installed without the auxiliary fire pin. Apparently the door manufacturer's listings did not require the pin, but the hardware listings do. WWYD?
Steven Wehofer of Allegion sent me today's Fixed-it Friday photo of a magnetic holder modification in a school, and the first thing I thought about was how many kids must be doing pull-ups on it every day.
When a good teaching tool comes along, I get really excited. Especially when the resource is shared in the mainstream media, so it's readily available to people outside of the door and hardware industry. Please share this widely.
Thomas Reinhardt sent me today's Wordless Wednesday photo of a door with an egress problem. I can appreciate that someone manufactured a rolling rack for the AC unit and it can be moved out of the way if the exit is needed, but...no.
NBC News: “The moment she heard the first pops of gunfire, the teacher knew what she had to do: She needed to make sure that her classroom door was locked."
I received a Quick Question last week that has come up before: What is the difference between a roller latch and a roller strike? Are both prohibited on fire door assemblies?
John Lozano of Allegion sent me today's Fixed-it Friday photos, taken in a high school. There were several doors installed this way...you may have to look closely to see what's going on. Any theories?
While the installation of an electromagnetic lock can be relatively simple, the code requirements that apply to mag-locks are somewhat complicated and may be confusing. These answers to frequently asked questions should help.
Jeff Weller of Southwest Entrances sent me this Wordless Wednesday photo from a trip to Quebec City. I have to say...this was definitely a first for me. This "exit" leads to an exterior fire escape.
Because of the holiday weekend and the Webinar Wednesday sessions scheduled for the first week of the month, this is a last-minute notification of the online training available TOMORROW - I hope some of you can make it!
During the pandemic, many facilities changed to hands-free door pulls to minimize contact with the hardware. It was only a matter of time before someone found a way to make creative use of the touchless design.
There’s a rumor going around that I am retiring. I have to admit, there are days when I’m tempted to throw a big party and pretend to retire so I can go underground and get some work done, but my planned retirement date is still several years away.
When I was a specwriter, I dreaded having to tell an architect that their idea wasn't code-compliant, was not durable enough to hold up over time, or would not function in a way that would work well for the end user...
Although the model codes do allow turnstiles if certain criteria are met, egress and accessibility requirements must be addressed in order to ensure adequate life safety and access for all building occupants.
Last week I posted a photo that was submitted by Bruce Gill of North Central Supply as part of the 3,000-post celebration, and the photo raised a few Quick Questions about the mag-lock...
After writing countless times about fire doors needing to close and latch, and hearing about the impact of open fire doors during a Bronx apartment fire earlier this year, seeing a stairwell fire door permanently prevented from closing is just too much.
This deadbolt modification was found on an apartment entry door - the surface bolt prevents the deadbolt from being unlocked from the outside with a key. Pretty creative, but I hope no one ever has to enter to help during an emergency.
As we continue to celebrate the 3,000-post milestone, I don't know what to say about today's Wordless Wednesday photo sent by Bruce Gill of North Central Supply. SMH
When a lost key may have fallen into the wrong hands, and the maintenance staff needed to secure the door until the locksmith arrived, this was their solution. Photo submitted by Paul Linder of Hills Brothers Lock and Safe.
Sent in by Pak Keung Yip, this photo was taken on the back porch of a residential home, where the contractor provided a knife to cut out a screen that might block the exit. I love the creativity and thought that went into this solution, but I'm a little wordless.
I spent a few hours yesterday on Cape Cod, and I'm pretty sure this is the first time I've seen a baby grand piano used as a hold open. Happy Fixed-it Friday! Send your photos before midnight tonight if you want them considered for the 3,000-post celebration!
A quick question came up yesterday during a code update class, as I was talking about a change to NFPA 80: Can a rectangular or oblong hole be prepped in an existing fire door in the field?
I didn't have to look far during my road trip to find an egress problem. The coffee was GREAT, but the rear exit would be confusing during an emergency. Maybe next time I will work up the nerve to pull back the curtain.
My kids are well trained. Not to pick their clothes up off the floor or wash their dirty dishes, mind you, but after 13 years of taking iDigHardware readers along on vacation, they are very responsive when I ask them to help me find a door to share here.
As someone who regularly visits women's restrooms, and has spent the last 20 years trying to get 3 kids ushered through the process quickly and without accidents or meltdowns, I REALLY appreciate this application!
I love creative door and hardware applications, especially when someone takes the time to add their artistic flair to the fix. Check out these Fixed-it Friday photos from my neighborhood.
Last week I received an email from an architect, asking if I would update a post from 2009. Naturally, I was curious about how this old information was being used.
iDigHardware will reach a new milestone very soon, and you can help me celebrate! Submit your photos by Friday, June 17th, for a chance to win something from the iDigHardware Prize Vault!
Low energy automatic operators are the type of automatic door operators that are typically actuated by a “knowing act.” There are several questions about these operators that come up frequently...
There is a new Security in 30 session coming up on June 17th, along with Webinar Wednesday on the 29th. Which of these educational presentations are you planning to attend?
Classroom doors are a critical point of security during an intruder situation, and today’s post (a continuation of this week’s series) will focus on just some of the many considerations related to classroom security, particularly door hardware.
Continuing this week’s series of posts addressing the use of layered security in schools, today’s post focuses on securing the interior perimeter, according to codes, PASS Guidelines and other best practices.
As I wrote in yesterday’s post, this week I will be sharing some resources on layered security, to help decision makers learn about the physical security of door openings in schools and in other buildings. Today's focus is on exterior doors.
I have not posted here on iDigHardware since the tragedy that occurred at Robb Elementary School in Uvalde, Texas, last week. As a mom, I’m heartbroken and needed some time to process. As a security professional, I continue to be committed to school security that also prioritizes safety and accessibility.
Today I am wordless for the 19 students and 2 teachers killed in the latest senseless act of school violence at Robb Elementary School in Uvalde, Texas.
Yesterday's post about protruding objects raised a related Quick Question: The IBC section addressing limitations on protruding objects references projections into "circulation paths." What is a circulation path?
I know that many of iDigHardware's readers are ultra-focused on door openings (me too!), but every so often I see a non-door application illustrating a code requirement that could also apply to doors and hardware.
David Seeley of WESCO | Anixter sent me today's Fixed-it Friday photo of a door closer he saw in a Cape Cod restaurant...what do you think? Was it worth the extra effort to partially conceal the closer?
Last week I wrote about fire doors vs. fire exits, and I mentioned that I would try to change/clarify the Merriam-Webster definition for "fire-exit bolt." I received this Quick Question: What IS a fire-exit bolt?
Today's Wordless Wednesday photo came from Grant DeLay of Allegion (and he gets all the credit for the product name), but it looks like the photo originated with Brian Ingham of Integrated Design Solutions. It's a classic!
Every so often I ask the readers of iDigHardware to weigh in on what you are seeing in your state or local jurisdiction. Today I need your help on the topic of accessibility symbols - please share your insight in the comments.
