This Fixed-it Friday photo illustrates the common problem of an access control system that has been modified for convenience. No matter how much time and money are invested in planning and installing a system, human intervention is always a factor...
If you have not watched this 2014 Dateline series on school shootings, it gives the perspective of survivors and describes their struggles in the months and years after the tragedies occurred. Very moving.
The door in these Wordless Wednesday photos has 7 surface bolts, an exit alarm, a door position switch, AND a rolling door. Wow.
Delayed egress vs. controlled egress...can you explain the difference? Do you know when and where each type of locking hardware is allowed, and what the IBC requires in order to ensure life safety?
People ask me all the time..."What's a 'CUSH' closer?" The answer is in our latest whiteboard animation video!
You may have to look at these for a few minutes to get the gist of what's happening. These are double-egress pairs in a hotel I stayed in recently. Instead of using a double-egress frame so the doors were in the same plane, each door was mounted on the opposite side of a double-rabbet frame...
This is why I use PDF code books!
What I want to know is...why do some people think it's ok to use these locks after-hours, when the building is unoccupied? I don't see anything in the codes to support that, but it seems to be a common belief. Am I missing something?
I am often asked whether it is code-compliant to install a separate deadbolt with a latchset or lockset on a dwelling unit entry door in an assisted living facility. Most doors in a means of egress are required to unlatch with one operation for egress. While there is an exception...
I don't know that I've ever seen floor stops like these...
This is one of the most common questions I receive...do you know when and where panic hardware is required?
Articles touting the value of classroom barricade devices without any mention of the related safety issues are legitimizing the use of these devices that are not compliant with the model codes. An article in this month's Security Management magazine, a publication of ASIS International, covers the perceived security benefits of the devices used in the Mentor, Ohio school district...
I've had many requests for help lately with regard to converting an existing fire door with a mortise lock to a cylindrical lock. There are several concerns here...
Last year I posted a link to a guide on the US Access Board's website, which helps to explain the ADA Standards. Initially, the online guide only covered Chapters 1-3. The Access Board recently added Chapter 4 to the guide (found here), which is the chapter covering Accessible Routes - including Doors, Doorways, and Gates...
I've shared several news stories about high school students designing barricade devices (here's one, here's another), but now the Air Force Research Lab has joined the effort. Sadly, this "innovation" probably won't stop until a tragedy occurs...
I hope this whiteboard animation video helps to explain one of hardware's most confusing topics - flush bolts and coordinators!
I've written quite a few specifications for museum projects and although many architects have asked me for "invisible doors," I do my best to talk them out of it. These are two different museums, in two different states, but these Wordless Wednesday photos were both sent to me the same week by two different people...
Today I presented as part of a panel discussion at the annual conference of the National Association of State Fire Marshals, along with my fellow panelists: Larry Flowers - Ohio State Fire Marshal, Ed Paulk - Alabama State Fire Marshal, Kelly Nicolello of UL, and John Woestman of the Builders Hardware Manufacturers Association. The panel was moderated by Jim Tidwell of Tidwell Code Consulting, and Jim Narva of NASFM kicked it off.
As many of you know, I have been closely watching the barricade device issue in Ohio. If you haven't been following along, here's the summary of what happened:
The theory is that the stick on this hold-open is there so you don't have to bend over to install/remove the wedge. I'll bet the architect who chose those door pulls didn't have this aesthetic in mind. Thank you to Rachel Smith of Karpen Steel for this Fixed-it Friday photo!
Here's the latest in our series of whiteboard animation videos explaining door-related topics. This one covers various options for securing classroom doors, in alignment with the guidelines from the National Association of State Fire Marshals. Enjoy and share!
These photos from an Alabama day care center make me nauseous. Literally. I'm Wordless.
I recently went on a field trip to an elementary school with Greg Thomson (Allegion specwriter) and a group of our specwriter apprentices, and we saw a couple of interesting applications in the courtyard. The courtyard is fully enclosed so a means of egress is required at each end...
I've received several photos lately of restroom doors with non-code-compliant deadbolts. Some examples of this problem could be...
Today's Fixed-it Friday photo is from Joe Cross of Allegion. This actuator mounting location does NOT meet the recommendations of the A156.19 standard...
(Note: If you're in the St. Louis area, there is a school security seminar coming up on July 22th, and there's still space if you want to attend.) Today's post: I haven't posted much about traditional wired glass lately, but the hazard continues to be present in existing schools and other facilities...
I've seen a lot of funky egress route restrictions in airports, but this was a first...
Some of you might be thinking..."Doors can't be disguised like that!" but this mural is on the access or ingress side of the door, not the egress side. The model codes require means of egress doors to be readily distinguishable and easily recognizable as doors, but this requirement is typically applied to the egress side of the door...
I often find that I am more cautious about modifying code requirements than even the AHJ. This opening is serving an Assembly occupancy, where delayed egress is not allowed by the IBC. In addition, the AHJ approved the 30-second delay instead of 15 seconds...
Yesterday's post was not ready in time for the afternoon notification, so in addition to today's Fixed-it Friday photo, there's a bonus set of photos from the Bronx Zoo. If you're reading this on the email notification, you should see the zoo link below. Happy Friday!
As promised in Monday's post, here are some of the doors we saw during our visit to the Bronx Zoo. Keep your camera ready during your summer vacation and send me some photos of interesting doors that you see (please)!
I have nothing to say except "thank you to Grah Security for today's Wordless Wednesday photo."
We just got back from NYC, where we were invited to visit the FDNY fire station for Engine 320 and Ladder 167 by the developer of the Cease Fire hinge, which I wrote about last fall. The kids are working on a project to help reduce deaths in home fires, so it was a privilege to visit the station and get all of their questions answered...
I checked with the ICC and NFPA for a code opinion, and both staff members acknowledged that the code does not address this specific issue, so it would be left up to the AHJ. One made a good point - the time to initiate the timer and the time to release the device should be two separate periods...
The first response might be - there's no exit sign, so no problem, right? Wrong! While I can't say for sure that these particular doors are egress doors, using the presence of exit signs to determine whether the door is in a required means of egress is not a reliable plan. If a door has an exit sign, it needs to meet the egress requirements. And even if it doesn't have an exit sign...
This Wordless Wednesday photo from John Gant of Allegion ties in with Monday's post about viewer locations. I've never seen a requirement for 3 viewers in a hotel room door, so my guess is that one of the viewers was originally installed at the wrong location and a third was added to solve the problem...
I read an interesting article in the Washington Post yesterday, about the statistics on school shootings. The Fact Checker column asks, "Has there been one school shooting per week since Sandy Hook?" and examines a statement made by Senator Chris Murphy during a speech on the Senate floor last week:
Whenever something is not specifically addressed in the model codes or national standards, I'm bound to get questions on it, and viewer height is one of those things. ICC A117.1 - Accessible and Usable Buildings and Facilities and the 2010 ADA Standards do not include a specific mounting height for the viewer...
Jenny Pauley of Kendell Doors sent me this Fixed-it Friday photo of a non-code-compliant repair that was made because the top corner of the fire door split. This is pretty common when corner-wrap flush bolts are used, because of the amount of wood that is removed...
This report gives a very good overview of what we're up against in the mission to secure schools while maintaining life safety. If funding is not available, schools will come up with their own solutions. If those solutions are not code-compliant, legislators will override the codes. This will continue to happen until another tragedy occurs. I wonder how many tragedies it will take.
Jeff Payton of Williams Electronics sent today's Wordless Wednesday photo. I'm the first to admit that I'm not an expert on exit signs. If you ARE an expert on exit signs, can you explain the need for the high-level sign? If only the door closer installer had taken as much pride in the installation as the conduit installer. :)
How do we help to ensure that these creative problem-solvers have the necessary information when considering a do-it-yourself approach?
You may remember a guest blog post from Lieutenant Joseph Hendry, who is with the Kent State University Police Department and the ALICE Training Institute. Lt. Hendry has an article in this month's Campus Safety Journal, on the challenges created by using barricade devices for classroom lockdown. Here's my favorite part...
This could definitely be a Wordless Wednesday photo, but I couldn't wait to share it so here's an excellent (terrible) Fixed-it Friday photo from Rachel Smith of Karpen Steel. Unbelievable.
I don't know why it still surprises me when I see blocked exits, but the good news is we'll probably never run out of photos for Wordless Wednesday. Don't forget to send me photos of what you see during your summer vacation!
A while back, I wrote an article for Doors & Hardware about panic hardware requirements for rooms housing electrical equipment. Someone asked me recently how the voltage and amperage are determined. Do you add up the voltage or amperage of each piece of equipment and look at the total? Or is it the highest voltage/amperage of any piece of equipment that determines whether the room is over the threshold where panic hardware is required?
If you live and/or work in Ohio, it is not too late to talk to the state legislators in your district(s). If you call their offices, you may be able to talk to them directly or get an email address. The Door Security and Safety Foundation has compiled some information that might be helpful to send along with your concerns...
As many of you know, on Fridays I usually post a photo of a creative way someone has solved a door problem, which is often non-code-compliant and unsafe. If you've arrived here today looking forward to this week's Fixed-it Friday photo, I apologize because I have to write about another type of "creative problem-solver" today.
As much as I like black/white-yes/no answers, sometimes it's not that easy. This is one of those questions, and it keeps coming back. Here's the scenario...I have an exterior aluminum door serving a large Assembly occupancy, with no fire rating required. I don't need the ability to dog* the device, and I have fire exit hardware left over from a previous project. Can I install the fire exit hardware on the aluminum storefront door?
I have to admit, these are pretty miraculous rescues...whether it was "divine intervention," the heroic efforts of firefighters, or the closed doors (and walls) that helped to keep the victims safe. A different type of Wordless Wednesday post for this week...
