Maybe I should have a new series called "Jeff Tock's Photos." :-) Jeff is one of the Ingersoll Rand trainers who travels the world teaching people about hardware, and he sees a lot of "special applications." Jeff sent me this group of photos recently (thanks Jeff!):
Someone sent me this photo of the custom door pulls made by Tice Industries for the Danner Shoe Manufacturing Company, and I thought they were so cool that I asked Scott Tice to send me more photos of their custom door pulls. They have other custom capabilities as well, so check them out!
By now I'm sure some of you are wondering if I'm lying in a ditch somewhere, but I'm not! Our website host has had some problems on the server side which left me unable to log in since last Thursday. :-(
The good news is that these doors are being replaced, presumably with doors that will provide security without jeopardizing life safety. The bad news is that this is a popular restaurant and their main entrance doesn't come close to meeting the requirements for egress.
A while back, I posted some recommended specification language regarding the annual inspection of fire and egress door assemblies, and I have since revised it based on everyone's comments. The original language and comments are still here, and the updated language is below. This should be inserted into the hardware specification for projects designed to comply with the 2009 edition of the IBC, or in jurisdictions which require compliance with NFPA 80-2007 or 2010. Feel free to comment if you have suggestions for improvements.
I visited a jobsite today and saw some QEL devices in action. If you're not familiar with the QEL device, it is a *quiet* version of the electric latch retraction exit device. When the access control system (card reader, key fob, etc.) signals the door to unlock, the latch(es) retract to allow someone to pull the door open. You can always exit by pushing the touchpad. I have used the QEL device on several high-profile spaces where noise is an issue. I recently specified them for auditoriums at the United States Institute of Peace and the Crystal Bridges Museum of American Art, where the latches are held retracted while the auditorium is unlocked. As you can see in the video below, the touchpads are also held in while the latches are retracted so there will be no sound associated with exiting while the doors are unlocked.
A couple of weeks ago I got a notification that someone wanted to connect with me on LinkedIn, and it turned out to be an architect that I worked with on several projects many moons ago, Reese Schroeder. When I checked out his profile I found that he is the co-founder and Director of Product Development for RM Global. The company creates and manufactures absolutely gorgeous art glass, including glass doors. Their secret process results in a resolution of 4,000 dpi at 36 billion color potential - far exceeding the range of the human eye.
AccessibilityOnline is conducting monthly webinars on accessibility as a collaborative training program between the ADA National Network and the US Access Board. The 2010 ADA Standards for Accessible Design were recently approved, and the revised standards will be the topic of the next webinar. The webinar is scheduled for September 2nd, 2010, from 1:30-4:00 ET. Here's a description of the presentation from their website:
Some creative and unusual hardware applications sent in by blog readers:
At least once a month someone asks me whether it's ok to use a deadbolt with a thumbturn on a door that is required to be accessible. It took some digging to get a definitive answer, because the accessibility standards don't specify a certain dimension that would be acceptable for the thumbturn. The ADA guidelines and ICC A117.1 both state that hardware has to be operable without tight grasping, pinching, or twisting of the wrist, but that still leaves a lot up to interpretation.
Some of the more attentive ihatehardware readers may have noticed a few little changes with the site lately. For a long time I've been thinking about adding another domain name for my blog, indicating my true feelings about doors and hardware. The original domain name, www.iHATEhardware.com, was chosen because almost all of the architects I work with hate or at least have an extreme dislike for hardware, so that URL is easy for them to remember.
It's hard to believe that last week was the 20th anniversary of the Americans With Disabilities Act. I clearly remember being sent to a seminar at the Ramada Inn in the early 90's to hear all about how this *new* law would affect architecture and construction. Of course, not much of the presentation was spent discussing the hardware requirements, so our industry was left to figure it out over the years.
