It’s a good thing that the problem with this frame prep was noticed before the frame was installed…can you tell what’s wrong with today’s Fixed-it Friday photo?
You need to login or register to bookmark/favorite this content.
It’s a good thing that the problem with this frame prep was noticed before the frame was installed…can you tell what’s wrong with today’s Fixed-it Friday photo?
You need to login or register to bookmark/favorite this content.
What do you mean the strike prep and the EPT prep aren’t supposed to be on the same side of the frame?
I’m assuming that is an EPT prep that should be on the hinge jamb and not the strike jamb.
An EPT prep on the strike side. Oops is right. With computer driven equipment these days, the mistake was probably in the inputting of the data and no one caught it. Gotta make sure you attached the prep code to the correct jamb leg.
Looks like a power transfer prep that should be on the hinge side.
PREP FOR STRIKE AND POWER TRANSFER ON SAME SIDE OF JAMB
That power transfer prep needs to be on the hinge side, not the strike side of the door!
looks like the power transfer prep is on the wrong side of the frame
Taking a wild guess that the topcutout is for a wire hinge power transfer!
It looks like the prep for a strike and an electric power transfer were made on the same side of the frame. One or the other of these is on the wrong side.