View Larger Image FF: Strikeout Harry Porosky of Integrated Openings Solutions sent me today’s Fixed-it Friday photo. This looks like it’s going to be a pretty expensive fix. You need to login or register to bookmark/favorite this content. By Lori Greene|2020-10-07T20:35:52-04:00October 9th, 2020|Fixed-it Friday, Panic Hardware|4 Comments Share This Story, Choose Your Platform! FacebookTwitterLinkedInRedditWhatsAppTumblrPinterestEmail About the Author: Lori Greene Related Posts FF: Hold the LineFF: Hold the Line Recent Posts WW: Just a little off the side Gates in a Means of Egress Coming Up! FF: The best laid plans… Decoded: Key-Operated Locks 4 Comments Mario Fernandez October 9, 2020 at 5:09 pm - Reply Am I seeing this wrong or the panic bar is on the pull side of the door? Krystina October 12, 2020 at 10:16 am - Reply Am I seeing that correctly that the panic device is on the wrong side of the door? Charlie October 12, 2020 at 1:01 pm - Reply LOL. this must be his first day at door hardware installation Because the exit device is on the pull side of the door. Needs to be on the push side & the door must swing out or in the direction of egress. And the strike he is holding surface mounts onto the door frame stop/soffit. Wesley Diener July 16, 2021 at 6:33 pm - Reply But I followed the template!!! Actually have done that personally by mistake. Anybody hear of RH vs LHR? Or worked on a steel door with inverted top and bottom caps and got the bottom mixed up with the top? (One MFG very nicely puts the order info on the bottom on from a certain MFG location instead of the top like the rest of their doors.) Fortunately I was usually able to cover it with the trim. Leave A Comment Cancel replyComment Don't subscribe All Replies to my comments Notify me of followup comments via e-mail. You can also subscribe without commenting.