When I worked for a hardware distributor back in the 80's, I had a secret hiding place where I kept my prized possessions...including a small cardboard "book" that contained samples of each of the common finishes used for hardware. I had to keep it hidden, because people were always trying to steal it, or rip out the little metal pieces to send as finish samples...
A 42-unit apartment building was destroyed by fire last week in Columbus, Ohio. The fire began in a second-floor apartment, and the door to the apartment was left open when the resident evacuated. According to investigators, fire doors in the corridor and stairwell were also propped open, allowing the smoke and flames to spread and leaving the residents no safe escape route...
Most of you know that I'm not a fan of the retrofit security "inventions" that seem to be flooding the institutional market lately, but I do admire creativity, and since it's Fixed-it Friday I thought I'd share a product I recently saw in the news - The EasyLock. I have no idea how effective it is as a security device, but the design is pretty clever...
Check out the new resource on iDigHardware and you might win a $50 Amazon gift card for helping to validate the current codes in your area!
When I stay in a hotel I always check the fire doors and egress doors, and unfortunately I usually find issues. I guess I'm not the only one...
Lots of fire doors in the news, in large part because of Fire Door Safety Week last week!
It seems like just about every week I see a new classroom security device that promises to thwart intruders and help keeps kids safe in school. As I've said multiple times, many of these devices are not code-compliant, and trade security for life safety. In evaluating these products, my criteria are...
On a thru-wire hinge, the wires are typically run through the thickness of the hinge leaf. Like inside of the hinge leaf where you can't see them. Not actually through the hinge. Oh never mind. You're doing it wrong.
I'm sure you've seen panic hardware with some sort of guard or protection above, below, or around the panic. Should the codes define a certain area of free space around the panic hardware, ensuring that the actuating portion is obvious and readily available to someone using the exit? How much clear space is needed?
It's Wordless Wednesday again, and these photos DEFINITELY left me wordless...
There are 3 educational opportunities coming up, but you have to act fast! An on-demand video of a fire door test - 1 week only! Access Control Training begins Thursday! The next online Decoded course begins tomorrow!
Here are some photos from last week's trip to CONSTRUCT in Baltimore...I'm headed to Phoenix & Scottsdale soon, so let me know if there are doors there that I should share!
All I can say about these photos of a field-prepped electric strike is...this is why we specify all of the hardware, including access-control hardware, in the hardware specification. Field preps do happen on occasion, but not all installers are created equal...
In a recent discussion about code change proposals, there was a question about whether electromagnetic locks should be an acceptable alternative to panic hardware, on doors serving Assembly occupancies - essentially the application shown in the photos below. If approved, a door serving an assembly space, and perhaps even Educational occupancies depending on how the proposal was written, could have mag-locks released by a sensor, and no panic hardware - no latching device at all...
What can I say? Thank you to Gary Huizen of Huizen's Locksmith Service for posting this Wordless Wednesday photo on the iDigHardware Facebook page!
According to news reports, it sounds like an open door or possibly two open doors, along with an illegally locked second exit and insufficient smoke detectors may have contributed to the deaths of 4 children in Chicago's Roseland neighborhood...
In preparation for an upcoming class for access control professionals, I'm putting together some printable summaries of code tips on security-related topics. The first sheet I'm working on addresses requirements specific to fire door assemblies that would be important to an access control integrator or security consultant...
Thank you to Tim Meegan of Doors Incorporated for today's Fixed-it Friday photo! It's a classic! In case anyone is wondering, this article talks about the mounting guidelines for auto operator actuators!
Something recently caught me by surprise and I feel like I should bring it to light so that anyone who is specifying, supplying, or installing electrified hardware on stairwell doors would be aware of the potential issue...
I'm working on a blog post - hopefully for tomorrow, about a code problem involving stairwell reentry requirements. And it's not good news. But for today, from Edward Marchakitus of Cornell Storefront Systems, the emergency exit on a retail store. You'll be happy to know that this is the "before" photo:
In addition to providing support and training on door-related code requirements, my job also includes participating in code development - helping to propose changes to the codes that affect our business, and reviewing proposals from others. There is currently research underway that may propose to add school security requirements to a national code...
